GigaCore 30i - 10Gb

Most suitable applications
Installations

PoE
PoE ++ Optional (up to 1000W)

RLinkX (Link redundancy)
Yes

Groups (VLAN segmentation)
Yes

MultiLinkX (Link aggregation)
Yes (With future FW upgrade)

Profile manager
Yes

Memory
Flash 1Gb RAM – 8Mb NOR flash 4Gb EMMC storage

MAC address table
16384 entries

Address learning / Aging
Self learning, Auto aging

Switching throughput 64 Byte
125000Mpps

Switching capacity
168Gbps

Jumbo frames
MTU up to 12000

IGMP support
Yes (V1/V2/V3)

IGMP snooping
Yes, enabled by default

Port sensing
Auto negotiation

Auto crossover
MDI / MDIX

Auto sensing
Full or Half Duplex (Gigabit is Full Duplex)

Ethernet connectivity
24 x RJ45 connectors (1Gbps))

Fiber connectivity
6 x SFP+ cages (10Gbps/1Gbps) (independent from other ports)

Ethernet port speed
1Gbps

Serial
1 x USB C

Power connectivity
1 x IEC (C14) inlet for each PSU

Power input
100-240VAC, 50-60Hz

Power consumption
Maximum 50W - Maximum 1050W (Depending on PoE and PSU configuration)

Fuse
NA

Backup power input
100-240VAC, 50-60Hz (through second hot swappable PSU)

Backup PoE power input
100-240VAC, 50-60Hz (through second hot swappable PSU)

PoE
PoE ++ Optional (up to 1000W)

Supported protocols
Dante©, RAVENNA/AES67©, Ethersound©, Q-SYS/Q-LAN, sACN, ArtNet, MANet, HogNet, RTTrPL (BlackTraX), IPMX, NDI, IEEE 802.1p CoS (Class of Service), DiffServ (DSCP), PoE (802.3af) (optional), PoE+ (optional), PoE++ (802.3bt) (optional), IEEE 1588 PTP V2, AVB/MILAN, IEEE 802.1as (gPTP) and more...

Sound protocol compliance
Yes (low jitter)

Ethernet compliance
IEEE 802.2, IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet, IEEE 802.3af PoE(optional), IEEE 802.3at PoE+(optional), IEEE 802.3bt PoE++ 90W(optional), IEEE 802.1p CoS, IEEE 802.1d Spanning Tree, IEEE 802.1w Rapid Spanning Tree, EEE 802.1s Multiple Spanning Tree, IEEE 802.1Q VLAN, IEEE 802.1ab LLDP, IEEE 1588-2008 PtPv2,IEEE 802.1 BA-2011 AVB, IEEE 802.1as (gPTP)

Display and jog
NA

Configuration
Through the built-in web server, Network wide configuration through Araneo software

Status LEDs

• Global status LEDs: Device, power, PoE power and mode
• Port status LEDs: PoE, groups, link/activity and port speed
• Dark mode available

Colored RGB LEDs
Yes

Mounting
Rack

Enclosure
Robust metal housing

Dimensions (W x D x H)
482 x 309 x 44 mm (19" x 12,2" x 1,73")

Weight

• 4,56 kg (with 1x 100W PSU inserted)
• 5,2 kg (with 2x 100W PSU's inserted)
• 4,7 kg (with 1x 550W PSU inserted)
• 5,48 kg (with 2x 550W PSU's inserted)

Packaging
545 x 335 x 125 mm

Environment

• Operating temperature: 0 to +50 °C
• Storage temperature: -10 to +70 °C
• Humidity (non condensing): 5 to 95% RH

Noise level @1m

• Max 21,8dBA (Ambient: 0 – 30°C)
• Max 37dBA (Ambient: 30 – 50°C)
• Max 32,5dBA (PoE <550W, Ambient: 0 – 30°C)
• Max 58dBA (PoE <550W, Ambient: 30 – 50°C)
• Max 36dBA (PoE >550W, Ambient: 0 – 30°C)
• Max 68dBA (PoE >550W, Ambient: 30 – 50°C)

BTU

Certificates/Approvals
cSGSus Mark (UL), CE Mark, UKCA Mark, CB certificate, RoHS

Standards
IEC 62368-1, UL 62368-1, CAN/CSA C22.2 No. 62368-1, EN 62368-1, FCC Part 15 CFR 47, CAN/ICES-003, EN 55032, EN 55024

Product codes

• LU 01 00077-10-1S1 / GigaCore 30i - 24x1G – 6x10G(SFP+)
• LU 01 00077-10-2S1 / GigaCore 30i - 24x1G – 6x10G(SFP+) - 2nd PSU 100W
• LU 01 00077-10P-1S5 / GigaCore 30i - 24x1G – 6x10G(SFP+) - PoE++
• LU 01 00077-10P-2S5 / GigaCore 30i - 24x1G – 6x10G(SFP+) - PoE++ - 2nd PSU 550W
• LU 70 00639 / GigaCore Slide-in PSU 100W
• LU 70 00640 / GigaCore Slide-in PSU 550W